[DML] Re: Engine cover

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

If the cover is rubbing on the rear facia it will not spring up. You
may have to adjust the cover foward so it doesn't rub. You do that by
loosening the hinges and moving it. After adjusting the engine cover
you will have to adjust the rear sunshade.
 For the front you have to adjust the latch so the loop goes right
into the center and you may have to shorten the smaller spring in the
latch to get it to pop up.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "lordshill1" <lordshill@xxxx> wrote:
> Hello.. I've run into a problem with the hatch (screen) cover on the 
> motor.  It takes two people to open it.  One pulls the cable and the 
> other lifts the cover.  It seems to me that it should be spring 
> loaded.  The same is true for the front, but it only requires one to 
> pull the handle and lift the cover.  Thanks
> 
> Roy VIN#0893






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/