Re: [DML] Now idle motor problem (was idle problem)

["stainlessilusion" <5n-@xxxxxxx>]

The same plug/wires you're talking about. All 3 of mine give +
voltage, so obviously it has to be that my ECU is cooked...I'm
currently working on a replacement. -----Dani B. #5003

--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@xxxx> wrote:
> What plugs are you talking about ?
> 3 wires go to the idle motor:
> +12V continuously
> switched ground left
> switched ground right
> 
> the "grounds" are always switched, there are never both active at once.
> depending how long one is active and the other isn't - it varies the
angle
> of the motoraxle and therefore the opening for the air.
> 
> Elvis
> 
> -----Ursprüngliche Nachricht-----
> Von: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]Im Auftrag
> von stainlessilusion
> Gesendet: Donnerstag, 5. Mai 2005 00:55
> An: dmcnews@xxxxxxxxxxxxxxx
> Betreff: [DML] Now idle motor problem (was idle problem)
> 
> 
> Okay, so now I just got a NOS idle motor and when I plug it in-nothing
> happens. I cleaned the grounds on both sides of the intake and checked
> the voltage in the plug. I get 5.4 in plug 5, 12.4 in plug 4, and 4.?
> in plug 3...why is there no ground? I know the motor switch is fine
> because the solenoid will still click when you open the switch. Fuses
> are all good. I took out the ECU and opened it up, there doesn't seem
> to be any melted parts on the front of the board, but I can't find any
> pictures to match the back of the board to. I have some browned solder
> here and there where the green coating melted, but everything is still
> connected. I don't have my digital camera with me today otherwise I
> would have taken a picture. I tested the motor with a 12 volt battery
> briefly and it seems to work. Now what? hmmm....Dani B. #5003




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/