[DML] RE: Door Struts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] RE: Door Struts
- From: "sgskbm" <SGSKBM@xxxxxxx>
- Date: Thu, 05 May 2005 19:13:18 -0000
I have read the posts about which vendor has the best door struts and
this has been of great interest to me. I bought a complete set of PJ
Grady's struts about three years ago and I have maybe 150 miles on
the car since I installed them. I probably have a total of 75
openings on the driver side and maybe 20 on the passenger side.
They are both now bad in that they no longer go up more than 1/2
way. I live in San Diego and the car is kept in a garage so
temperature should not be a factor.
I am not complaining about the quality or the fact that I now need to
replace them but I too am wondering about which vendor to use. It
seems like some vendors give a longer warranty, some are temperature
compensated and some are highly recommended.
Have PJ's changed in the past couple of years? If so, that could
make a difference. Interestingly enough, the ones on the engine
compartment and the trunk seem to still work fine.
I thought it might be the torsion bars but to be honest, they worked
fine when they were new so I don't think this is the problem. Any
thoughts?
Thanks,
Scot Stern
6452
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN