[DML] Now idle motor problem (was idle problem)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Now idle motor problem (was idle problem)



Okay, so now I just got a NOS idle motor and when I plug it in-nothing
happens. I cleaned the grounds on both sides of the intake and checked
the voltage in the plug. I get 5.4 in plug 5, 12.4 in plug 4, and 4.?
in plug 3...why is there no ground? I know the motor switch is fine
because the solenoid will still click when you open the switch. Fuses
are all good. I took out the ECU and opened it up, there doesn't seem
to be any melted parts on the front of the board, but I can't find any
pictures to match the back of the board to. I have some browned solder
here and there where the green coating melted, but everything is still
connected. I don't have my digital camera with me today otherwise I
would have taken a picture. I tested the motor with a 12 volt battery
briefly and it seems to work. Now what? hmmm....Dani B. #5003






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated