[DML] Re: Front license plate holder

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

As with most problems with items purchesed from venders your first
place to go is back to them for support. Most venders are honourable
enough that they will do what they can to help you use their products.
In this case if they don't take it back I guess you could just drill
some holes. Maybe all you have to do is follow the instructions that
were probably included with the product. In all cases if you are not
happy with what you purchesed you should be able to return it. Of
course this assumes it is returnable (some sales may be final) and you
did not alter it. It also assumes you did buy the item recently. Maybe
the reason it was inexpensive (read cheap) was because you have to
drill the holes? If you do decide to return the part don't expect to
recover the shipping costs to and from. Your "best bet" would be to
just drill some holes. It is a little harder to do in S/S than mild
steel so you may need a couple of drills. Use cutting fluid and
resharpen frequently.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "John Macias" <jdm5@xxxx> wrote:
> Has anyone purchased the stainless steel license plate holder from 
> SpecialTAuto? I went with theirs (cheapest) but cannot figure out how 
> to install it, it only has one hole on each end. The others I have
> seen from other suppliers have two on one end and three on the other.
> I called SpecialTAuto, but the person I spoke to (I think he said his 
> name was John) said he has not seen the part, and could not make a 
> determination on how it should be installed. This is my first order 
> from this supplier, and unfortunately they did not have a picture of 
> the item when you place the order. Any suggestions? Should I return
> the part?
> 
> John
> vin #7009






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/