[DML] Re: Stainless Bumper Letters

["Randal" <azman3us@xxxxxxxxx>]

Dave is correct the majority on the vendors use 3M VHB..  The only 
tip after a good cleaning of the area is insuring the proper temp.  I 
just installed the door sill letters and used a heat gun to warm up 
the adhesive (not hot enough to bubble it, but warm enough to make 
holding the letters uncomfortable in your hand).  Air temp above 70.

This insures that the adhesive flows and creates a good bond.

Thanks for the plug Dave....

Randal - "The 3M Guy"
www.az-d.org

PS - Last weekend the AZ-D hosted Dan & Don from the DeLorean Motor 
Center here in Phoenix for a tech session as we have also done with 
P.J. Grady, & DMCH.  I must say that we DeLoreans owners are truly 
lucky to have the outstanding support for our cars that we do! 


--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote:
> 
> They usually have the world's strongest 3M (Hi Randall!) sticky 
tape already on them. Just make sure you get the bumper very clean 
and dry before you put them on, you get one chance.





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/