Hi, I need to check the adjustment of my Delorean's manual trans cross gate cable adjustment because I can't get reverse or 5th gear. Does anyone know how to gain access to the shift lever assembly thru the console to check the cross gate guide plate notch adjustment? The shop manual says, remove the screws and lift the rear of the console verticle trim plate to gain access to the shift lever assembly and gear shift trim plate. But in real life when looking at the console inside the car there is only the one piece grey plastic "front panel" as it is called in the parts manual that fits over the gear shift boot and houses the led clock. When removing the only two screws in the real of the panel, the panel does not budge. The shop manual does not sense to me. Does anyone know howt remove that panel if it is supposed to be removed at all to check the cross gate assmbly adjustment or how do you gain acess to the shift lever assembly? Please help if you can, the car is far too heavy to push when we need to back up! Thanks! Mike VIN#5781 __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/