[DML] Re: plans for torsion bar adjustment jig

["Nick" <nicholden@xxxxxxxxx>]

Hi, I have just adjusted mine last week with great success and what i 
did (my louvers were already off though) was i cut a piece of thick 
plywood i had to fit the accross the engine bay pontoon. Put some rags 
inbetween the fibreglass and the plywood so as not to scratch it. This 
gave me a level base to put a car small stand on. I used the stand to 
support the 1/2 inch extention. Very easy and quick.

Cheers, Nick - sydney 10927




Message: 19        
   Date: Fri, 01 Apr 2005 16:30:02 -0000
   From: "Matt Spittle" <supermatty@xxxxxxx>
Subject: Re: plans for torsion bar adjustment jig



If you don't mind removing the louvers, this job can be done with only
a breaker bar, allen socket and a 4' steel pipe for leverage.  Still
requires 2 people, though.  

Matt
#1604









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/