[DML] Re: Torsion Bar Issue

["endotex23" <endotex23@xxxxxxxxx>]

Before I go let me be clearer on welding torsion bars. As Toby pointed
out, austhentic stainless steels are not heat treatable but imho that
isn't a show stopper in this case.

I would trust a bar welded by me using my equipment for my own use or
a friend only. I have done so once in the past and thus far it's held
up fine on the car it was installed in. And I would only weld a left
hand bar, since the rights are readily available. (I was under the
impression these days the lefts were also available).

I might trust a bar welded by someone else but I'd have to talk to
them, see what gear they'd use, and test a few of their coupons. In
other words they'd have to be able to convince me they know what
they're doing. 

Unless you know enough to make that judgment I strongly suggest you
buy another one. If you can't find one for what you consider is a fair
price contact me as I have a pair lying around. Best to stay with a
vendor though because I tend to be as guilty as charged when it comes
to making a profit.








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/