RE: [DML] Torsion Bar Issue

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Brandon, A friend of mine had the drivers side break last year and he had it
welded and it's holding fine. You do have to know what your doing when it's
welded. The right hand side is still available, so I would buy a new one.
This is where prevention is the best cure. Put on new struts and take the
pressure off the bars.
John Hervey
www.specialtauto.com



-----Original Message-----
From: brandelorean [mailto:brandelorean@xxxxxxxxx]
Sent: Monday, March 21, 2005 11:41 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Torsion Bar Issue





Hi there,

I was wondering if a torsion bar breaks, is it possible to have it
welded and work?  My RH Door Torsion Bar broke and I was able to have
it welded with lots of support around the break.  I haven't been able
to test it on the door yet, and I figured I'd ask before I do.  Has
anyone tried it before?  In my case it was a super clean break...but
if anyone has tried let me know.

Thanks,

Brandon
Vin 3323
Denver CO








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/