RE: [DML] Fw: door lift cylinders
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Fw: door lift cylinders




As I told Video Bob after he bought the new Stabilus factory original struts
that they are strong and needed to re adjust the torsion bars when the temp
was around 70 to 75  degree. I see by the video that hasn't done.  He may
wake up some morning and the $1,000.00 torsion bar is broke and wish it was
done.  The video also shows that they perform even in cold weather and don't
sag like some others.
The bar really needs to be backed off. Stabilus also does not build in the
buffer as the door goes up. There are some that are made in Turkey that
will, but the quality unless it's been improved hasn't been very good.
If you will re adjust the torsion bar you will be fine.
John Hervey
www.specialtauto.com



-----Original Message-----
From: Videobob Moseley [mailto:videobob@xxxxxxxxxxx]
Sent: Thursday, February 24, 2005 6:51 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: RE: [DML] Fw: door lift cylinders




Here,
check out this video of my doors and you will see what I am talking about.
It is a cool 52 outside...

http://www.bttfstuff.com/MOV05225.MPG

>From: Soma576@xxxxxxx
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: RE: [DML] Fw: door lift cylinders
>Date: Thu, 24 Feb 2005 16:25:35 -0500
>
>
>
><<<If anyone is interested, I can make a video showing how the doors open
>with
>these
>shocks and you can tell me if it is normal or not.
>
>- VB>>>>>
>
>VideoBob,
>
>Are you sure your torsion bars aren't overtightened a notch or two?  If you
>remove the piston from the door and let the door hang, it should only have
>a couple inches of space from being closed.  If you have much more than
>that, the bars are too tight.  It's likely a previous owner may have
>cranked them up one because the struts were about dead and this way they
>opened better!
>
>Andy
>
>
>
>
>
>To address comments privately to the moderating team, please address:
>moderators@xxxxxxxxxxx
>
>For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
>To search the archives or view files, log in at
>http://groups.yahoo.com/group/dmcnews
>Yahoo! Groups Links
>
>
>
>
>
>
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated