Re: [DML] CV Boot replacement

[mike clemens <rmclemns@xxxxxxxxx>]

I replaced the boots on my automatic and it only took
about 4 hours, start to finish.  Remove the four bolts
on each end of the shaft, drop them off the car,
change boots, and reinstall.  I had the backend up on
jackstands and the wheels removed so the access was a
lot easier and you can also spin the axle shaft to get
to the bolts.

Mike      Pizza Special


--- sweitzel_2000 <sweitzel@xxxxxxxxxx> wrote:

> 
> 
> 
> Group,
> 
> What is the preferred procedure for replacing the CV
> boots on an
> automatic? Does the entire axle shaft have to come
> out of the car? or
> is there some trick that makes it easy? 
> 
> 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/