Re: [DML] TURN SIGNALS

["Carl Davis" <carldavis@xxxxxxxxxxxxx>]

Thanks joe, that why I figured I would ask beofre I do more damage than 
good.   Carl

----- Original Message ----- 
From: "DMC Joe" <dmcjoe@xxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 26, 2005 8:18 PM
Subject: RE: [DML] TURN SIGNALS

> Carl,
>
> Your response is the exact reason I asked you the question concerning your
> hazard flasher switch. Your problem may be the result of bad contacts 
> inside
> the hazard switch but can also be caused by dirty contacts in the plug at
> the rear of the switch. Before replacing the switch disconnect the plug 
> and
> spray it with electrical contact cleaner. Remove the switch and spray its
> interior with the same spray. Be sure that the plug is fully seated when
> replacing. If the problem still exists replace the hazard switch.
>
> DMC Joe

>
> -----Original Message-----
> From: Carl Davis [mailto:carldavis@xxxxxxxxxxxxx]
> Sent: Wednesday, January 26, 2005 2:44 PM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: Re: [DML] TURN SIGNALS

> I was wondering if they might be related, I press the hazard switch but 
> only
> one side on the instrument cluster flashes.







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/