[DML] Throttle cable routing

["Dave Sontos" <dsontos@xxxxxxxxxxx>]

By the picture it looks like your cable IS routed correctly. The top mount
is for the Automatic transmission downshift cable.

Dave Sontos
Vin 02573

-----Original Message-----
From: stainlessilusion [mailto:5n-@xxxxxxx] 
Sent: Saturday, January 15, 2005 9:26 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] More problems found (was Piston rings + sleeves)

Now that the car is in the garage and defrosting, I'll be able to
check everything tomorrow-tonight I just did some more checking around
and discovered something else... with my gas pedal down all the way,
the assembly on the engine doesnt open all the way, in fact, it is
more then an inch away from the full throttle switch! I've gone over a
few photos and see that the cable is routed differently but I can't
find the correct routing anywhere in the book. There seems to be 2
places to screw the cable into, mine is screwed into the back bottom
spot obviously instead of the top...I've uploaded a picture to show
how far it was opening...and to imagine-I was driving this car like
this for months! wonder what it will be like once it is able to
operate correctly. Anyone know where to find the correct routing??






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/