Re: [DML] Re: Refurbished Fascias

[kKoncelik@xxxx]

In a message dated 1/7/2004 3:37:54 PM Pacific Standard Time, 
jhaldeman@xxxx writes:
Painting over the top of this is not a very good idea, so the 
fascias I have were carefully stripped of any bubbling/cracked/peeling 
sections, then sanded with 80 grit, 220 grit, then wet sanded with 600 
grit and finally 1500 grit paper, and primed so as to prevent this from 
ever reoccurring.
This is better than I do 
all I did was 400 grit


[Non-text portions of this message have been removed]