List, I am writing an article for Gullwing Magazine about the idle system and want to be as complete as possible. My car is in storage w/o access for the winter time and i am having trouble visualizing the throttle linkage. Not only that, but i haven't had to work on it for many months, which is leaving me sketchy. I am attempting to describe how to adjust throttle linkage from scratch, by adjusting the throttle wire for tightness, adjusting the linkage between the spool and hammer, and adjusting the stop screws. If someone who is 100% sure on procedures could explain to me what to look for and how to adjust the middle linkage, i would be greatly appreciative and i will credit your input on the article. I did this myself like three years ago but now without my car nearby i don't remember what i did. Please do not reply if you are not 100% sure of what you are saying because it is my highest priority to provide accurate information to the DeLorean public. Thanks for the input! Andy [Non-text portions of this message have been removed]