hello all, The weather was so bad this 4 day weekend I couldnt take the car out at all. I did remove the front interior light that never worked right and took it apart and cleaned all the contacts with brasso, came out real nice. I found that on the clear plastic part of the switch is a circular brass ring that closes the connections. The brass is mounted via an appendage of the clear plastic and a smaller metal ring, heated and mashed together to hold it in place. REAL CHEAP. This plastic bends when the bulb heats unter tension of the spring and pushes downward. I was able to heat and bend it back into position works good now. Ill post a few pictures tonite. jordan 11613