Re: [DML] What to do about hole in frame...

[Daniel Hill <skaife_hrt2001@xxxx>]

supermattthehero <supermatty@xxxx> wrote:
On my car I have a rust hole in the frame about the size of a half
dollar. It is located on the rear part of the frame, on the
underside, at the wide section beneath the passenger-side rear
suspension mount area. Any recommendations how to take care of this?
One gentleman I spoke with said this part of the frame is not load
bearing, so I should just scrape off the rust and coat it with POR-15.
He also said that its very difficult to weld the DeLorean frame
because the metal is so thin. I would like to know what the list
thinks as a second opinion.

thanks,

Matt 
#1604


Dear Matt,

I would recommend that you cut the rust out, and where the hole is and then bolt a new piece of metal onto it. That should do the trick.

Joe

Sydney, Australia





---------------------------------
Yahoo! Personals
- New people, new possibilities. FREE for a limited time!

[Non-text portions of this message have been removed]