What would I need to look out for when considering putting a Flat 6 240HP Boxer engine in a Delorean?? Do you suppose it would work out? spec: Type: 6-cylinder horizontally-opposed (boxer) for low center of gravity and reduced vibration Construction: Die-cast aluminum ally block, cast aluminum alloy heads with 4 valves per cylinder and centrally located spark plugs Valve Train: 24-valve, with dual overhead camshafts (DOHC) and hydraulic valve lash adjusters Displacement: 3.3 liter / 3318 cc / 202.5 cubic inches Bore and Stroke: 96.9 mm x 75 mm / 3.815 inches x 2.95 inches Compression Ratio: 10.0:1 Horsepower: 230 @ 5,400 rpm Torque: 228 @ 4,400 rpm Maximum Engine Speed: 7,000 rpm Engine Management: Integrated fuel and ignition systems. Engine Control Unit (ECU) computer with learning and aging controls, self-diagnosis and limp-home features. Twin knock sensors and oxygen sensors provide separate control of each cylinder bank. Fuel System: Multi-port electronic fuel injection with dual-spray fuel injectors Fuel Required: Unleaded 91 octane Ignition System: Distributorless electronic crank-angle-dependent direct-fire ignition with individual spark/coil units at each platinum-tipped spark plug Exhaust System: Twin downtube headers and dual catalytic converters for reduced back pressure Michael vin 6067