Re: [DML] Re: 6x8 speakers in rear

[Martin Gutkowski <webmaster@xxxx>]

I've posted a picture of my rear speaker setup at the floowing link. You 
can see the old holes on the mounting bracket - I drilled two additional 
holes allowing the bracket to be rotated around the lower hole, lifting 
the speaker off the wheel arch. These are 5" drivers from memory and the 
fit is still tight. Sound quality is still poor, even with the Dynamat 
(that's all the silver stuff), though I'm not sure if it's the result of 
the speaker not having an enclosure, or the Kenwood head unit. Note how 
I've had to mount the ring that would normally be used for the grill, 
just to space the cone away from the inside of the trim panel

http://www.delorean.co.uk/DSCN0519.JPG

Martin
#1458 (in the pic)
#4426 (has Kicker K410's, as yet untested)

David Teitelbaum wrote:

> Yes. they do fit. You have to bend the brackets and "squeeze" but they
> do fit. The bigger the better for speakers in the rear.
> David Teitelbaum
> vin 10757