I was checking over my car in preparation for the Fall Tour and I noticed my fan fail light would not go on. I have a Fanzilla so I couldn't believe that it had failed! I figured it was just the bulb. Switching the bulbs around with the door lock bulb didn't help but if I twisted the socket I could get it to light up. It turned out to be the ground wire where it connects to the shell of the light socket. It was crimped tightly but it wasn't making electrical contact. I removed it, cleaned it, and then soldered it back. I mention this only so people will check the functionality of the fan fail light and then if it isn't working not to jump to conclusions and figure it is just the bulb. Even with a Fanzilla you must check the fan fail light from time to time. BTW this could happen in many places in the car so always check your grounds! David Teitelbaum vin 10757