Re: temp gauge not working

["David Teitelbaum" <jtrealty@xxxx>]

The temperature sending unit for the temp gauge is on the front of the
engine on the right side. Very common for the (single) wire to get
knocked off when working in that area.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "armac.rm" <armac@xxxx> wrote:
> The temp gauge stays at the rest position. All other gauges work. I 
> have check the sending unit for a 12 volt ref. key on and found no 
> voltage at either terminal.(the sending unit is the one on the side 
> of the water pump driver side right? two wire connector.) The shop 
> manual offer no help and was wondering if there is any other thing I 
> should check before having to remove the inst. cluster.(inline 
> connector,common failures,ect...)