RE: [DML] Re: Stalls after starting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Re: Stalls after starting



If it is the CPR, then it shouldn't be possible to rev up the engine when
cold.
Does it make 4000rpm when cold (of course only to check it for a few seconds
!) ?

What do you think guys ?

Elvis

> As David says the CPR ( Control Pressure regulator ) Warm up regulator
> could be going bad, but also the 02 adjustment could be adjusted to lean
not
> allowing the control plunger in the fuel distributor to rise high enough.
> If it doesn't rise then very little or no gas goes to the injectors. If
you
> try to start it and it dies, Then pull a plug as fast as you can and see
if
> it's wet or dry.
> John Hervey
> 
> 
> -----Original Message-----
> From: David Teitelbaum [mailto:jtrealty@xxxx]
> Subject: [DML] Re: Stalls after starting
> 
> The first thing that comes to mind would be to check the control
> pressure regulater aka the warm-up regulater. 

-- 
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated