RE: [DML] Re: Control pressure regulator rebuild?

["Arnie Brandon" <arnie@xxxx>]

John, please help me understand your below message. As I read it, if I send
you three (3) used CPR's you will send me a rebuilt CPR for free, like zero
cost, OK? Now if I send you two (2) used CPR's and $50.00 I still get a
rebuilt CPR for free, like zero cost? Am I confused? Why am I having a
problem deciphering this?
Arnie

-----Original Message-----
From: John Hervey [mailto:john@xxxx]
Sent: Friday, May 30, 2003 6:25 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: RE: [DML] Re: Control pressure regulator rebuild?


Robert, Yes I sell them exchange and have them professionally rebuilt as you
can see on the site and calibrated to the Delorean Spec.
If any one has an extra CPR say two or three, I will trade services. Send me
three CPR's and you get a new rebuilt free. Or send me two and $50.00 and
get a new rebuilt free.
John hervey
www.specialTauto.com.


-----Original Message-----
From: therealdmcvegas [mailto:DMCVegas@xxxx]
Sent: Friday, May 30, 2003 9:58 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Control pressure regulator rebuild?


--- In dmcnews@xxxxxxxxxxxxxxx, "erikgeerdink" <erikgeerdink@xxxx>
wrote:
> Is there a way to rebuild these? Mine is not working properly as
> well, and I have an extra. I would like to rebuild the extra and
> install it. I know of cleaning it out and making sure it's not
> clogged. what about the electronics? can this be serviced?
>
> Erik


As far as I know, no, there isn't a rebuild kit available. At least
not available to the public. It's been a while since I last cracked a
CPR open, but I can tell you that it's not exactly rocket science.
The whole unit is just a shell, with all the internal pieces bolted
in, and a rubber gasket on the bottom sandwiched in to create the
vacuum diaphram. Tore one apart a while back, so if you want a
description, check the archives, although once you open the regulator
up, it's pretty self-explanitory.

I don't know where the rebulids are from, nor who is making them. But
as you can see from John Hervey's web site, they're not just limited
to the DeLorean version! What's funny is when I got my rebuilfd CPR
from DMCH, it appeared that someone scratched out the old model #,
and stamped the correct DeLorean one on. In addition, it also had an
Audi logo molded into the casing that had been scrached off as well!
But it works great, so I'm not gonna complain!

So in the end, I don't know where, or even if you can get
any "rebuild kits", but obviously, they must be out there. And FWIW,
the CPRs that Hervey sells look to be the exact same units at a
slightly cheaper price, judging by the tamper seals, and the filter
screens.

-Robert
vin 6585 "X"



To address comments privately to the moderating team, please address:
moderators@xxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






To address comments privately to the moderating team, please address:
moderators@xxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/