> -andrew > #4115 > Houston TX Andrew One of the connections may be hot; maybe enough to burn a wire or connection so look for that. Also, the low pressure cycling switch on the AC accumulator may have defective contacts inside. Look for damaged wires in the circuit. Take off the fitting at the accumulator and try a jumper across the circuit and test the amps at the clutch. That will give you some idea about the switch. Based on your unit number you may have a high pressure switch; jumper test that connection also. You might check the ground wire on the fan motor. That connection is notorious for coming loose and that could be causing a drain on the circuit. You just have to check them all. There is just no other way. Harold McElraft - 3354