Re: [DML] Re: Front side marker lights not working

[Christian Williams <delorean@xxxx>]

I've had a front marker rust out so badly that i had to get a new bulb
holder from a parts car. Does anyone know a cross-reference for this piece
that can be spliced into the front wiring harness?

-Christian


On Fri, 11 Apr 2003, Harold McElraft wrote:

> Each side of the running/park lights is on a different fused
> circuit. So, if just the front amber lights do not work it is
> probably the bulb or, in a lot of cases, water generally gets into
> the bulb area and rust causes a loss of connection. The bulbs are
> 1816, 4 watt bulbs. During replacement, use some bulb grease to
> protect the connection. You can get it at NAPA, etc. It is good to
> use on all bulbs when you service them. Be careful to tighten the
> amber housing down lightly when you put it back on. Age causes them
> to break easily if the screws are tightened too much.
>
> Harold McElraft - 3354
>
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "dmcorlando2003" <SundeQuick@xxxx>
> wrote:
> > Hey guys,
> >
> > I just replaced my headlight switch (LMS) and it works, however
> the
> > amber marker lights on the fenders don't work now (they worked
> > before) either with or without the headlights on. All other
> lights
> > work just fine.
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxx
>
> For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>