RE: [DML] Plastic Dust Cap - Angle Arm

["K. Creason" <dmc4687@xxxx>]

put a drop of RTV sealant on it to hold it tight.
just a drop, mind you, so that it easily removed.

-----Original Message-----
From: wmack [mailto:wmack@xxxx]
Sent: Sunday, March 09, 2003 10:46 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Plastic Dust Cap - Angle Arm


Hey Group,

I am having angle arm problems again. The lower cable broke on its way to
the
angle arm assembly. I have since replaced the lower cable, but because I
wanted to make sure that the angle arm assembly wasn't broken, I took it off
the car and inspected it. After reassemblying everything, the plastic dust
cap is coming loose in the hub and preventing the angle arm from functioning
correctly.
Any thoughts as to how to prevent the dust cap from coming loose? I have
talked with the friendly folks in Houston, and they said it should simply
slide right in and work properly. Any advice?

Thanks
Willie Mack
Vin 5043



To address comments privately to the moderating team, please address:
moderators@xxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/