[DML] Re: Brake proportioning valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Brake proportioning valve



That's what I said in my previous (original) post....not arguing the 
idea. But he brought up drum brakes into the equation.

Steve

--- In dmcnews@xxxx, jwit6@xxxx wrote:
> In a message dated 8/2/02 10:11:29 AM Eastern Daylight Time, 
> dmcman73@xxxx writes:
> 
> << > hydraulic fluid is self adjusting. >>
> << We are talking about the Delorean right? It has four wheel disk 
> brakes....only adjustment that the brakes need are for the parking 
> brakes >>.
> 
> I think that by 'self adjusting' he means that given equal 
pressure at the 
> source, psi at all 4 calipers will be the same, provided no 
proportioning 
> valves are used. Since the Delorean has a twin piston master cyl, 
if the bore 
> and stroke of the master cyl is the same for both front and rear, 
the psi 
> delivered front and rear would be the same. Right?
> 
> If someone wants to check, switch you lines front to rear at the 
master cyl 
> and let me know if the rears lock up first ..:-)
> Jim 6147






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated