NO START ... update.. still need help! :)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

NO START ... update.. still need help! :)



Well .. here is the update ..

First off .. thanks to all for your help so far! :-)

I have found I mixed up some of the vacuum lines and corrected the
problem

Now the car starts .

BUT!! And a big but

I double checked the timing. and its fine.

It will run . but really rough . I adjusted the 3mm hex in the mixture
control unit

Tried advancing and retarding the timing..

And can get it to idle around 2000 rpm

Anything lower and it cuts out

As well.. it seems to be running real rich . as the exhause pipes from
the engine to the cat are getting RED HOT!! Glowing!

Suggestions?!

Thanks again all for your help

-Kenneth
05541




[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated