Matt, You asked: "I got 5 out of six which isn't bad, but how do you get to the left front one near the AC compressor? Any special technique? Any method of taking the least amount of parts off to get to the plug?" To remove plug # 5 remove the idle speed motor (PM 2/5/0 #10). When removing this component be careful not to pull the brass tube (PM 2/5/0 #21) away from the mixture control unit. Re-installation of this tube is difficult and may require the replacement of the O ring seal. (See dherv10 prior posting "O Rings & Vacuum leaks") You additionally asked: ".........are there any blanks from Curtis, ILCO,.." Yes, Taylor (Volvo) blanks are also compatible with DeLorean keys. DMC Joe Tech Information, DMC Joe Help Club, & Store "Summer Parts Sale" http://shopping.oraclesmallbusiness.com/dsvstore DeLorean Website Directory www.dmc.tv ----- Original Message ----- From: "argent486" <argentum@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Sunday, April 21, 2002 10:34 PM Subject: [DML] No more lurking for me! > Hello, > First objective was to replace the spark plugs. I got 5 > out of six which isn't bad, but how do you get to the left front one > near the AC compressor? Any special technique? Any method of taking > the least amount of parts off to get to the plug? > > My car has the two key system and I know that the suppliers have > official blanks for sale. I will probably grab some in the future but > are there any blanks from Curtis, ILCO, or others that really work? > With only one set of keys I'm going to have a nightmare of locking > them in sometime.