Re: [DML] auto transmission pan gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] auto transmission pan gasket



Go to your local auto parts store and buy a roll of cork gasket material.
Costs a couple of bucks. Unroll the material, place the pan flange side down
on the cork material, take a ink pen or #2 pencil and trace around the
outside of the flange. Next, trace all the bolt holes in the flange. Remove
the pan and trace a line one inch on the inside of the outside flange line.
Take a pair of scissors and cut out the gasket. Take a 1/4" paper hole punch
and punch out the bolt holes. Install the pan back in the car and go for a
drive and put the money you saved into a good lunch out.






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated