In a message dated 4/10/02 10:59:48 PM Eastern Daylight Time, stevepeck1@xxxx writes: << While fiddling with my child-of-Satan window motors and before getting things back in place, I discovered that the front bottom edge of the white plastic window track was off the track. After lots of tiwsting and a little bleeding, I got things back on track. But after assembling everything, it popped off again. this time, totally off the track. Is there any fix/trick to this? >> I think that after many years the plastic window track brackets begin to physically warp and distort so that keeping them on the track becomes a real challenge since they're not really shaped the way they need to be in order to function properly. I actually had to bend and reposition the metal bracketry supporting the plastic track bracket to get my windows to stay on track and work reliably... Jim
Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive
DMCNews Mailing List Archive
DMC-UK Mailing List Archive
This site contains affiliate links for which we may be compensated