RE: [DML] Engine Removal

["Marc A. Levy" <malevy@xxxx>]

I recently did this. It was pretty straight forward. Took me about 4 hours by myself.

Nothing special about the removing the DMC engine VS any other car, other than you need to remove the rear fascia. Also, not very complicated.


Disconnect all the stuff between the engine/trans assembly and the rest of the car (Throttle cable, shift linkage, drive shafts, fuel lines, and so on..), and lift with hoist!  


-----Original Message-----
From: Ed Garbade [mailto:edgarbade@xxxx]
Sent: Friday, January 11, 2002 12:34 PM
To: dmcnews@xxxxxxxxxxxxxxx
Cc: edgarbade@xxxx
Subject: [DML] Engine Removal

<SNIP>

With all that in mind I searched dmcnews site and the archives to try and 
locate any reference material re: removal of the engine and transmission.  
Did find some pictures but this basically showed a removed engine and not 
the process (as well as no instructions).

<SNIP>