James, Make sure the small wiring harness on the bottom of the switch is connected securely. I hit the switch while rearranging my floor mat once and spent the next hour in absolute bewilderment as to why my car refused to start. Turned out the harness looked connected but wasn't completely. That's my guess. Max Glover #5284 http://www.geocities.com/mrwillis5050/ http://www.pearce-design.com/maxglover/dmc.htm ----- Original Message ----- From: jamesrguk <dmc12@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Wednesday, January 02, 2002 8:56 AM Subject: [DML] Inertia Switch > I was driving my D the otherday and putting into the garage, my foot > slipped off the brake pedal (automatic) and kicked the inertia switch > and the engine died. I looked at the switch and pusted the plunger > back down but not the fuel pump does not appear to be comming on as > the car will turn over but not start. >