[DML] Re: Torsion Bars reversed?

["tmpintnl" <tobyp@xxxx>]

Sorry guys, but I don't agree. If you swap the bars end-for-end at 
the same time you swap sides, the actuation direction would be 
correct. For instance, if the LH bar broke, you could install a RH 
bar on the left side if you installed the splined end into the LH 
forward hinge (with some challenging modifications to the hinge), and 
the square end into a redesigned retention bracket in the back. I'm 
not suggesting that this is practical, but it is possible.

Toby Peterson VIN 2248
Winged1

--- In dmcnews@xxxx, jwit6@xxxx wrote:
> [moderator's note: with this said, I'd say the reversing the torsion 
bar subject is done]
>