RE: [DML] Oxygen sensor / Lamder probe

["Willie Mack" <wmack@xxxx>]

Hey Paul
I had the same problem this summer when i replaced my oxygen sensor. I
finally got it out by putting lots of liquid wrench on it, and then putting
an open end wrench around the sensor, then i just kept combinning more open
end wrenchs together to get more leverage. I probably had 3 or 4 feet of
open end wrenchs together, but it finally gave.

Hope that helps
Willie
Vin 5043

-----Original Message-----
From: Paul Salsbury [mailto:paul.salsbury@xxxx]
Sent: Saturday, November 24, 2001 9:08 AM
To: doc-uk@xxxxxxxxxxxxxxx; dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Oxygen sensor / Lamder probe


Help!!!

I am at my wits end.........

Can someone please give me a hint or tip on how to get my old oxygen sensor
out. I know it should unscrew, however it just won't budge one mm, Is there
an easy way to do this, I've used penitrating oils and WD 40 to try and free
it to no avail.

Paul

#6463


[Non-text portions of this message have been removed]



To address comments privately to the moderating team, please address:
moderator@xxxx

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/