Re: starting up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: starting up



There are two things that you can check very simply. Make sure that 
the inertia switch is still "set". Just push on the top of the plunger 
to make sure it is down. It is either located by the counter by the 
brake pedal or on the left side by the hood release. If that doesn't 
do it go to the fuse panel behind the passenger seat and check fuse 
#7. It should be a 20 amp fuse. Make sure it didn't blow and the 
connectors to it aren't burnt. If these quick checks don't do it you 
might have a bad fuel pump but you won't know without further 
checking.
David Teitelbaum
vin 10757


--- In dmcnews@xxxx, scottymckenzie@xxxx wrote:
> My D doesn't start anymore, it tries to but never gets going. 
> There is also no noise anymore when i first turn the key to
> position 3 i think. I mean that 2 second noise you normally hear 
> before cranking... it seems like there is a problem with the
> engine not getting the fuel?






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated