Re: [DML] Schematics needed for mirror switch and mirror motors..

["DMC Joe" <dmcjoe@xxxx>]

Hank,

Good luck on your switch repair project. Keep in mind that this item is considered as non-serviceable. In any event here is some of the information you are looking for.

Wire Color Code
MIRROR MOTOR LH
WN: LEFT
WP: UP
WG: DOWN
W: RIGHT

MIRROR MOTOR RH
WN: LEFT
WP: UP
WU: DOWN
WR: RIGHT

All of the above contacts are 12 Volt +

CAUTION: Keep in mind that in some cases the wire color code between the switch and connector harness are different.

NOTE: We consider this item as non-serviceable; the switch will become unusable as designed if dissembled

DMC Joe

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: deloreanservices.com TEMPORARLY DOWN; USE: <http://www.geocities.com/MotorCity/Flats/3755/>

----- Original Message ----- 
From: Hank Eskin 
To: dmcnews@xxxxxxxxxxxxxxx 
Sent: Sunday, May 06, 2001 11:02 AM
Subject: [DML] Schematics needed for mirror switch and mirror motors..



Hello All,

I'm attempting to repair my mirror switch, but since many of the smallest
parts are missing, I can't seem to reverse engineer how the switch itself
works. I have the workshop manual with the circuit wiring diagram, but that
neither explains how the switch itself works, nor the workings/schematic of
the motors themselves. There are four wires going into the motors, but no
explanation which wire is for which motor (up/down or left/right) or
polarity. Any assistance or even simple explanation of how a working switch
operates would be greatly appreciated.

Thanks,

-Hank #1619



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 





[Non-text portions of this message have been removed]