Re: [DML] Oil Change

[Les Huckins <jhuckins@xxxx>]

New washer with each change or do you use them over?

Les

James Espey wrote:

> Excellent writeup! I used to do one thing differently, and I'm not sure how
> many people actually do this, but it's standard practice at De Lorean Motor
> Company. We use a copper seal washer with the drain plug. Item #11 on page
> 1-1-3 of the parts manual (part #102101).
>
> James Espey
> DeLorean Motor Company
> Houston, Texas
>
> 281/568-9573
> 800/USA-DMC1
> http://www.delorean.com
>
> > From: Mark Noeltner <mark@xxxx>
> > Reply-To: dmcnews@xxxxxxxxxxxxxxx
> > Date: Sun, 01 Apr 2001 12:38:15 -0500
> > To: dmcnews@xxxxxxxxxxxxxxx,delorean@xxxx
> > Subject: Re: [DML] Oil Change
> >
> > 4) Put a pan under the oil pan and take out the drain plug. It faces the
> > front of the car so you can't see it unless you get under it. Use the
> > adapter you bought to remove the plug. Once the oil has drained to just a
> > trickle, clean the plug off with a rag and put it back in. Snug, but don't
> > over tighten.
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/