anybody else have a D. here in Va Beach area? David Silek 757-467-0351 ----- Original Message ----- From: <jtrealty@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Sunday, March 25, 2001 10:54 PM Subject: [DML] Re: loose steering > If you have concluded that the looseness, (play) is in the steering > rack make sure that the bolts holding it to the frame are tight and > the entire rack is not moving. If indeed the rack has play in it the > recommended course of action is to remove and replace. The Delorean > venders can supply a "rebuilt" rack with exchange of your old core. It > is beyond the abilities of most to work on and the safety issues > involved would make most consider repalcement. About the only thing > you can do is lubricate if tight or "sticky" but that doesn't seem to > be your problem. > David Teitelbaum > vin 10757 > > > > --- In dmcnews@xxxx, edherrmann@xxxx wrote: > > I was checking out the front end and noticed that it seems that > > pushing and pulling on the sides of the tire it would move about 5 > > degrees before the steering shaft would move. Looking into it > further > > with the wheel off and checking the linkage of the steering rack it > > seems that the rod that goes into the gear box has slop in it before > > the steering shaft would move. Can this be fixed or do I need a new > > rack and pinion assy and i read on a previous post someone asked if > > there was a cross ref part for this pinion assy but could not find > > out if it was answered. Thanks ED HERRMANN VIN 16228 > > > > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >