Auto trans gov. problems...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Auto trans gov. problems...



Richard,

I've had the prob you are having before. It turned out to be that the
computer governor cable(s) had gotten burnt on the exhaust manifold. Check
the wires running from the engine compartment down to your tranny and check
for any signs of burns to the cables.


Hope this helps,


Duke

----- Original Message -----
From: <RJRavalli@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Saturday, February 24, 2001 3:49 PM
Subject: Re: Re: [DML] Auto trans gov. problems...


> Pete, thank you for the help, but my mechanic (who knows DeLoreans
> pretty well, at least better than any other mechanic in my area)
> said they already isolated the problem. According to them, they tested
the
> transmission without the governor and they couldn't find any
> mechanical problems; they were sure it was electrical. (And since I
> don't know jack about cars, I wouldn't be able to do what you described.)
>
> So would you recommend I get a new governor on warranty and have the
> same place re-install it to see what happens, should I go someplace
> else for a second opinion, or something else?
>
> But thank you for the testing method...I will save your mail incase I
> need it,
>
> Richard
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated