Re: Hylomar
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Hylomar



Ooops...I made a mistake. I didn't use Hylomar reasembling my manual 
transmission case, I used Anaerobic sealant as Rob Grady instructed 
me to use. Permatex P/N 51817 for a 6 ml tube and Permatex P/N 51813 
for a 50 ml tube.

Steve

--- In dmcnews@xxxx, "Dave Swingle" <dswingle@xxxx> wrote:
> I used it when I rebuild my trans last year. Yeah - it
> leaks very slightly, not enough to note on the floor but there is 
always a
> drop "dangling" underneath. I just wrote it off to the gasketless 
design of
> the split-case, and figured that nothing else would do any better.
> Every DMC I've ever been under has the same leak. The only one I've 
ever
> seen that didn't was a car with less than 2000 miles on it, the 
trans has
> probably never been hot.
> 
> The fact that the case design has the lube sitting on the seam at 
all times
> is kind of an invitation to leak. I was impressed that the Hylomar 
that I
> took out was just as soft as the new stuff. Based on other 
experience,
> > 
> Dave Swingle







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated