Re: Dielectric grease on fuses (was Fuse block (was Fuses))

["Steve Rubano" <srubano@xxxx>]

Dielectric grease is used in high vlotage areas such as the ignition 
on a car. The grease is applied to the inside of the boots (plug 
wires) before attaching them to the plugs. 

--- In dmcnews@xxxxxxxxxxx, "Walter" <Whalt@xxxx> wrote:
> Jim,
> 
> SNIP < This grease (if it's the stuff I'm thinking of) is generally
> used in low current applications where there is no heat generated 
to burn
> it.
> 
> Walt Tampa, FL
> 
> -----Original Message-----
> From: Jim Reeve <ultra@xxxx>
> 
> >What about a VERY small dab of
> >Dielectric grease on both pins for the fuse?