Folks, So far I have 16 people interested in a Dakota Digital dash for the DeLorean. Mark Hershey has graciously offered his DMC-12 dash for the 60-90 day R&D required by Dakota Digital. They are willing to make one-offs which include all 6 gauges mounted and ready to wire in at around $800. They need between 12 and 20 orders to consider this a "line" of Delorean digital dashboards. I've asked if they get that confirmation what the price will be and I am waiting to hear back. Here are some of the specifics: The colors of the digits and bar graphs are either blue, green, or teal. >From the list I found out that the speedometer cable is 7/8". This works with Dakota's setup. The speedometer still utilizes the cable which plugs into a pulse generator for Dakota's digital speedometer. The odometer can be factory preset so you can keep your existing mileage and continue from there. The tachometer can use existing wires and I have heard of people also wiring it to one of the plug wires as well. All the rest of the gauges should wire as normal. The compatible fuel senders work on the following ranges of empty to full: 10-180 ohms, 240-33 ohms, 0-30 ohms, 0-90 ohms, and 73-10 ohms. The gauges shows percent full or 100%-0%. I don't have the specifics on the DeLorean's fuel tank sender yet. Anyone? There is an optional sender in case ours will not cut it. The gauges can be set to flash at a preset level, such as temperature flashing above 220, fuel below 15%, etc...and are adjustable in this respect. This is what I have compiled so far. All of this and more can be seen by visiting www.dakotadigital.com. As soon as I have pricing I will post to the list what they want for the kit. That will be the last post from me on the fabrication issue. I guess from here I should maintain a personal email list to not barrage the list with further "digital" posts. Once more, if you are interested, please respond to me personally at mpolans@xxxx with an email and I will add you to the update list. Thanks, Matthew VIN #10365