Re: [DML] Warm-up circuit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Warm-up circuit
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Tue, 18 Jul 2000 01:14:59 -0400
Sorry,
I sent you an incomplete message. Scroll down to my message with the proper
ending.
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>
.
----- Original Message -----
From: DMC Joe <dmcjoe@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, July 17, 2000 12:05 AM
Subject: Re: [DML] Warm-up circuit
> Doug,
>
> You either have a problem in your acceleration enrichment circuit or you
> DeLorean needs a CO mix adjustment.
>
> To test your fuel enrichment circuit do the following:
> Start the engine and allow it to reach operating temperature. Access the
> engine compartment push the flap on the full throttle microswitch (parts
> manual 2/3/0 #15), if the engine surges the circuit is working. If there
is no change in engine sound the circuit is not working and is probably the
cause of your problem.
>
> "We're here to help you"
>
> DMC Help / De Lorean Services / <dmchelp@xxxx>
> Web Site: <www.deloreanservices.com>
> .
>
> ----- Original Message -----
> From: DOUG T VENNER <dmc12@xxxx>
> To: <dmcnews@xxxxxxxxxxx>
> Sent: Sunday, July 16, 2000 6:11 PM
> Subject: Re: [DML] Warm-up circuit
>
>
> > My D idles smooth as silk on cold start, but after 5-10min. of warm-up
it
> > starts to surge up and down at idle. It does this all the time and have
> yet
> > to find the problem. The car also hestitaes on accel but "kicks" in at
> about
> > 2500 rpm(Kinda like a turbo kicks in, no I don't have a turbo! LOL), any
> > suggestions???
> > Doug Venner
> > 83 D #16680
> >
> >
> > >When my D is warming up from a cold start, The engine idles up and
down
> > > >like someone is playing with the gas paddle.
> >
> >
> >
> >
> >
> > Before posting messages or replies, see the posting policy rules at:
> > www.dmcnews.com/Admin/rules.html
> >
> > To address comments privately to the moderating team, please address:
> > moderator@xxxx
> >
> >
>
>
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>
Back to the Home of PROJECT VIXEN