Re: [DML] Facia Bolt Replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Facia Bolt Replacement
- From: Bob Brandys <oehcs@xxxx>
- Date: Fri, 01 Jan 1904 10:53:06 -0600
On the 97 D, the front fascia retainer nuts had rotted out. We replaced with 5
mm nuts and then epoxied these in place. the epoxy we used was the two part J
B weld. So far after 2 years the studs have held just fine.
Bob
Back to the Home of PROJECT VIXEN