Re: [DML] Front end vibration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Front end vibration
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Mon, 26 Jun 2000 01:24:40 -0400
Take your DeLorean to an alignment shop that can do an "on the car spin
balance".
"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.
----- Original Message -----
From: David Sontos <dsontos@xxxx>
To: dmcnews Newsletter <dmcnews@xxxxxxxxxxx>
Sent: Sunday, June 25, 2000 10:17 AM
Subject: [DML] Front end vibration
> I've heard that front end vibration in the DeLoreans is common. Mine
> starts around 62 MPH through 77MPH. I've replaced tires and tie rods and
> had front end aligned. The whole front end seems tight. I've checked
> wheel bearings there is no play. The rack and pinion seems tight when I
> do a side to side check. Ball joints are unknown. How do I check for
> ball joint play? The shock bushings do need replacing, although there is
> no excessive play in them.
>
> Any suggestions are welcome.
Back to the Home of PROJECT VIXEN