--- In dmcnews@xxxxxxxxxxx, "MrCopies" <mike@xxxx> wrote: > Hi Gang! > > Tonight while removing the manifold on the drivers side, I came across a > hanging wire which looks like it's connected to a sensor (?) at the base of > the manual transmission where it bolts to the engine. This wire has been > cut (for a long time by the looks of things). It's on the drivers side of > the transmission right near the catalytic converter (but again it goes > directly into the transmission - at the pressure plate/flywheel). > Any ideas what this is supposed to be for? =============== Its the rpm/timing sensor for the dealer diagnostic system that DMC never invented. I've seen mechanics throw it away when doing the clutch. No big deal dave