[DML] Re: transmission pin

["DMC Joe" <dmcjoe@xxxx>]

Erik,

Difficulty shifting into 1st or 2nd gear could be the result of a bent
rollpin. There are several of these pins in the shifter linkage. Item
103219, located at 4/1/4 fig. 16 in the parts manual, is most commonly
responsible for this problem.

The repair cost for your transmission leak repair depends on the source of
the leak. Where is the leak?.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: Erik Geerdink <delorean502@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, March 25, 2000 3:37 PM
Subject: [DML] transmission pin


> I hear talk about how if it is hard to shift into first and second that
> over time a pin in the transmission goes out, or breaks. does anybody
> know the part number for this and what page in the shop manual it is
> in? I'm going to be bringing my D into the shop soon to install the SS
> Clutch line, Master/slave cylinder, and to take out the transmission to
> repair a leak that I have. When the transmission warms up, it tends to
> leak. Hey DMC Joe, excluding parts, how much would something like this
> cost on labor? I'm preparing myself for it to cost a lot of money.
> DMC Joe, if you cost e-mail me privately about this that would be
> great. Thanks a lot
>
> Erik Geerdink
> 4512