[DML] Re: Stainless Steel Panels?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Stainless Steel Panels?



In a message dated 02/21/2000 2:06:25 AM GMT Standard Time, 
MichaelPacman@xxxx writes:

> When Mike Loasby DMCL Director of engineering was conducting the technical 
> seminar at the 1997 EuroFest he mentioned the specs for the early cars was 
> in the area of 1/2 inch. He went on to mention that the correct way to 
hang the 
> body was in a sequence. First to position the roof structure, then hang 
the 
> doors, and then to hang the rest of the panels with the front and rear 
> fascia to follow
> Would door shims play a role in the panel alignment?
> BTW Is Mike Loasby returning to Belfast in 2001?

Mike Loasby has confirmed he will be coming to Belfast on May 24 to 27th 2001 
for the 20th anniversary EURO DeLorean Convention.
There will also be a number of former factory workers in attendance.
More later...
Robert Lamrock
Organiser EUROFEST 2001




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated